Floorcoat Polyaspartic P75 Pigmented

Product Description

A two component, solvent based high solids, high gloss, self-levelling pigmented polyaspartic (aliphatic polyurea) floor coating for interior & exterior surfaces.

Intended Uses

Floorcoat PA P75 has been formulated as a rapid curing, solid pigmented primer/topcoat system on properly prepared concrete for decorative and protective applications with self-levelling properties at high film builds. Floorcoat PA P75 is ideal for high traffic applications, ideal for use as a primer, intermediate/finish with an optional topcoat of Floorcoat PA C75.

When cured, Floorcoat PA P75 has excellent colour and UV stability, abrasion, impact and wear resistances, exceptionally high gloss and a smooth finish. Floorcoat PA P75 adheres extremely well to properly prepared concrete, epoxy and polyaspartic substrates. It can be applied as a top coat with chip/quartz additives for seamless flooring systems. The self-levelling properties offer makes an ideal surface for aircraft hangars where added thickness is required.

When mixed with Fusion Non-Slip, Floorcoat PA P75 has a significant increase in abrasion and slip resistance and will cure to a non-slip matte finish. The product will also become ideal for heavy duty environments requiring maximum abrasion resistance.

Floorcoat PA P75 is suitable for applications over concrete, walkways, commercial applications, industrial facilities, garage floors, cold storage areas, industrial warehouses, food processing areas, auto dealerships, aircraft hangars, patios, show rooms, pulp and paper mills, battery rooms and any areas requiring above average chemical and abrasion resistance.

Characteristics

  • Rapid curing times, same day return to service
  • High tensile strength
  • UV stable & non-yellowing
  • Excellent penetration and adhesion to properly prepared substrates
  • 1 Day installation with next day return to service
  • Varied traction/non-slip additives available with Fusion Non-Slip
  • Low VOC
  • Short re-coat time: 2-3 hours
  • Resistant to hot-tyre pick up
  • Excellent chemical, graffiti and stain resistance
  • Typical thickness
    As a standalone system: 200-600 microns DFT (in one or two coats)
    As a self-levelling system, up to 6 mm DFT
  • Applied using roller, brush or spray application

Downloads

Download Datasheet Contact Us for MSDS